What size needle can properly prepared BriteVu pass through?

May 21, 2015 Off Comments in FAQ

Liquid BriteVu can easily pass through a 27 gauge needle.  If cooled below 37o C (98.6o F) or not properly mixed, liquid BriteVu will being to harden or form clumps.  If this occurs, first make sure the total water volume is adequate (adjust for evaporation if needed) and heat the solution to 70-80o C (140-158o F) for at least 1 minute. 

Even at low temperatures (40oC) BriteVu will pass through a 30 g needle.  However, higher temperatures (60-80oC) will ease BriteVu’s flow through small needles.

The addition of BriteVu Enhancer lowers the temperature of BriteVu solution solidification to around 33oC and further improves solution fluidity through small (30g and smaller) needles.